HP 8712ES - Page 349

ES User’s Guide 8-43
Hardkey/Softkey Reference
I
Softkey in the IBASIC edit menu. Invokes the insert line menu for
editing IBASIC programs.
See the HP Instrument BASIC User's Handbook Supplement for more
information.
Access Keys:
Softkey in the define save menu. When on, allows you to save the
instrument state.
See “Saving and Recalling Measurement Results” on page 4-55 for
more information.
Access Keys:
Softkey in the update correction constants menu. Loads a permanent
copy of CC data from a floppy disk to internal EPROM. This must be
done after loading new firmware into the analyzer.
See the Service Guide for more information.
Access Keys:
Softkey in the service menu. Displays the analyzer’s firmware revision
and date, bootROM version, serial number, options, system impedance,
and amount of memory.
Access Keys:
Softkey in the custom colors menu. This key only affects the analyzer's
internal display. This key changes the brightness of the selected
display item. Values accepted are 0 to 100%, with 0 resulting in black
(not visible) and 100 resulting in full brightness.
Access Keys:
Softkey in the trigger source menu. Selects an automatic, internal
trigger.
Access Keys:
Insert Line
SYSTEM OPTIONS
IBASIC
Edit
Inst State
ON off
SAVE RECALL
Define Save
Install CC
From Disk
SYSTEM OPTIONS
Service
Update Corr Const
Instrument Info
SYSTEM OPTIONS
Service
Int Disp
Intensity
DISPLAY
More Display
Color Options
Custom Colors
Internal
MENU
Trigger
Trigger Source