HP 8712ES - Page 352

8-46 ES User’s Guide
Hardkey/Softkey Reference
L
L
Softkey in the menu. Displays the menu to setup
your LAN port and to turn the LAN state on or off.
Refer to The LAN Interface User’s Guide Supplement for information.
Softkey in the LAN menu. Displays the menu to set up the LAN port
on your analyzer.
Refer to The LAN Interface User’s Guide Supplement for information.
Access Keys:
Softkey in the select copy port menu. Sets the recognized IP address of
a LAN printer.
Refer to The LAN Interface User’s Guide Supplement for information.
Access Keys:
Softkey in the LAN menu. Allows you to enable or disable the LAN
feature. ON is the default setting, but when toggled OFF, more
memory is available to IBASIC and the volatile RAM disk.
Refer to The LAN Interface User’s Guide Supplement for information.
Access Keys:
Softkey in the define printer menu. Sets the printer to print hardcopy
so that the paper is oriented with the longer edge at the top and the
shorter edges at the sides. Toggles with .
Access Keys:
Softkey in the more printer menu. Sets the left margin (non-printing
space) in mm (25.4 mm = 1.00 inches). Minimum setting is 0.00 mm
(default); maximum is 200 mm.
Access Keys:
LAN
SYSTEM OPTIONS
LAN Port Setup
SYSTEM OPTIONS
LAN
LAN Printr
IP Addr
HARDCOPY
Select Copy Port
LAN State
ON off
SYSTEM OPTIONS
LAN
Landscape
Portrait
HARDCOPY
Define Printer
Left Margin
HARDCOPY
Define Printer
More Printer