HP 8712ES - Page 354

8-48 ES User’s Guide
Hardkey/Softkey Reference
L
Softkey in the limit options menu. Toggle to ON if you want limit lines
or points in the limit table to be visible on the CRT. Does not turn off
limit testing — only turns off visible limit lines or points.
See “Using Limit Testing” on page 4-28 for more information.
Access Keys:
Softkey in the limit options menu. Displays a menu that allows you to
turn visible limit lines on or off, and to reposition and enable/disable
the pass/fail indicator and text.
See “Customizing the Display” on page 4-45 for more information.
Access Keys:
Softkey in the limit menu. Toggle to ON if you want to view the limit
test status. When limit test is enabled, "FAIL" or "PASS" notation may
be displayed on the CRT. Pass/fail information is also routed to the
LIMIT TEST TTL IN/OUT connector on the rear panel of the analyzer.
The limits need not be visible (toggled to ON) for the limit test to be
valid.
See “Using Limit Testing” on page 4-28 for more information.
Access Keys:
Softkey in the limit options menu. Allows you to enable or disable the
PASS or FAIL text when limit testing is on. Does not enable or disable
the fail icon. The fail icon is enabled/disabled with the Limit Icon
ON off softkey.
See “Customizing the Display” on page 4-45 for more information.
Access Keys:
Softkey in the menu. Displays a transmission trace in
terms of transmission coefficient, displays a reflection trace in terms of
reflection coefficient, and displays an aux input trace in volts (from
1 mV/div to 20 V/div).
Limit Line
on OFF
DISPLAY
Limit Menu
Limit Options
Limit Options
DISPLAY
Limit Menu
Limit Test
on OFF
DISPLAY
Limit Menu
Limit Text
ON off
DISPLAY
Limit Menu
Limit Options
Lin Mag
FORMAT