ES User’s Guide 8-61
Hardkey/Softkey Reference
N
Softkey in the select disk menu. Displays NFS devices which are
currently mounted. Select the device you want to use for save/recall
from the table and press the softkey that corresponds to the device.
See The LAN Interface User’s Guide Supplement for more information.
Access Keys:
Softkey in the LAN menu. Displays the NFS setup menu which allows
you to enter setup information for mounting NFS devices.
See The LAN Interface User’s Guide Supplement for more information.
Access Keys:
Softkey in the NFS setup menu. Displays a table listing the currently
mounted NFS devices.
See The LAN Interface User’s Guide Supplement for more information.
Access Keys:
Softkey in the max search menu. Moves the active marker to the next
nearest peak to the left.
See “To Use Marker Search Functions” on page 4-7 for more
information.
Access Keys:
Softkey in the max search menu. Moves the active marker to the next
nearest peak to the right.
See “To Use Marker Search Functions” on page 4-7 for more
information.
Access Keys:
Softkey in the select disk menu. Selects the analyzer's internal
non-volatile RAM as the location where information is saved, re-saved,
or recalled.
See “Saving and Recalling Measurement Results” on page 4-55 for
more information.
Access Keys:
SAVE RECALL
SYSTEM OPTIONS
SYSTEM OPTIONS
MARKER
MARKER
SAVE RECALL
To Next Page
Loading...
