HP 8712ES - Page 380

8-74 ES User’s Guide
Hardkey/Softkey Reference
R
Softkey in several menus, the CRT adjust menu, the
SICL LAN setup menu, and the SCPI sock. setup menu.
If this key is pressed in the menus, it resets parameters
such as addresses, baud rates, handshakes, color, pens, resolution, and
margins to predetermined values.
See “Printing and Plotting Measurement Results” on page 4-78 for
more information on using the menus.
If this key is pressed in the CRT adjustment menu, it restores the
default CRT timing values.
If this key is pressed in the SCPI sock. setup menu or the SICL LAN
setup menu, it resets the socket port number or the HP-IB device
address, HP-IB logical unit number, and HP-IB name, respectively, to
predetermined values.
See The LAN Interface User’s Guide Supplement for more information.
Softkey in the marker math menu. Measures both the passband and
stopband of a filter in one sweep.
See “To Use Marker Math Functions” on page 4-18 for more
information.
Access Keys:
Softkey in the menu. Turns the internal RF source off and
on. Default is on.
Softkey in the set clock menu. Rounds off seconds to the nearest
minute. Rounds down with less than 30 seconds; rounds up to next
minute with more than 30 seconds.
Access Keys:
Softkey in the IBASIC menu that starts a program.
See the HP Instrument BASIC User's Handbook Supplement for more
information.
Access Keys:
Restore
Defaults
HARDCOPY
HARDCOPY
HARDCOPY
RF Filter Stats
MARKER
Marker Functions
Marker Math
RF ON off
POWER
Round Seconds
SYSTEM OPTIONS
System Config
Set Clock
Run
SYSTEM OPTIONS
IBASIC