HP 8712ES - Page 385

ES User’s Guide 8-79
Hardkey/Softkey Reference
S
Softkey in the utilities menu. Enables the user to define part or all of a
program by start and end lines. Once secured, the defined lines can not
be listed, seen, or edited.
See the HP Instrument BASIC User's Handbook Supplement for more
information.
Access Keys:
Softkey in the select copy port menu. Selects the hardcopy port device
highlighted in the select copy port list.
See “Connecting and Configuring Printers and Plotters” on page 4-68
for more information.
Access Keys:
Softkey in the character entry menu. Adds the character selected by
the pointer to the end of a title or file name.
Softkey in the insert line and insert character menus. Adds character
or word selected by pointer to an IBASIC program.
Access Keys: or
Softkey in the menu. Displays the menu to select the
hardcopy output device and its operating parameters. Default settings
(not affected by preset) are HP printer, PCL language, parallel port.
Use the front panel knob or arrow keys to highlight the device, then
press Select.
NOTE "Baud Rate," "Xon/Xoff," and "DTR/DSR" apply
only to serial devices.
See “Connecting and Configuring Printers and Plotters” on page 4-68
for more information.
Softkey in the menu. Displays the menu to select the
type of memory location to save to or recall from: non-volatile RAM
disk, volatile RAM disk, or internal 3.5” disk. Also allows configuration
of the volatile RAM disk.
See “Saving and Recalling Measurement Results” on page 4-55 for
more information.
Secure
SYSTEM OPTIONS
IBASIC
Utilities
Select
HARDCOPY
Select Copy Port
Select Char
Select
Char/Word
SYSTEM OPTIONS
IBASIC
Edit
Insert Line
Insert Char
Select
Copy Port
HARDCOPY
Select Disk
SAVE RECALL