HP 8712ES - Page 387

ES User’s Guide 8-81
Hardkey/Softkey Reference
S
Softkey in the set clock menu. Sets the month on the clock.
NOTE When selecting the month, you will always input
a number that corresponds to the month desired.
If the clock format is set to "alpha," however, the
displayed month will be a three letter
abbreviation (such as Mar for March).
Access Keys:
Softkey in the define plotter menu. Displays the set pen numbers menu
to assign pen numbers to items to be plotted (like traces, graticule,
etc.). In the color setting, different items can be plotted with different
pens. In the monochrome setting, all items are printed with the same
pen.
See “Connecting and Configuring Printers and Plotters” on page 4-68
for more information.
Access Keys:
Softkey in the reference tracking menu. Allows you to identify a
particular frequency as a point of interest. After the frequency point is
set, and frequency tracking is turned on by pressing
, the analyzer will always place the frequency
point of interest on the display reference line.
See “Using Reference Tracking” on page 4-42 for more information.
Access Keys:
Softkey in the set clock menu. Sets the year on the clock.
Access Keys:
Softkey in the modify kit menu. Allows you to modify the following
characteristics of the short calibration standard in your calibration kit:
delay, loss, and Z
0
.
See “Calibration Kits” on page 6-23 for more information.
Access Keys:
Set Month
SYSTEM OPTIONS
System Config
Set Clock
Set Pen
Numbers
HARDCOPY
Define Plotter
Set Track
Frequency
Track Frequency
SCALE
Reference Tracking
Set Year
SYSTEM OPTIONS
System Config
Set Clock
Short
CAL
More Cal
Cal Kit
Modify (connector type)