8-90 ES User’s Guide
Hardkey/Softkey Reference
T
Softkey in the BOOTP setup menu. Allows you to set the number of
seconds your analyzer will wait for a BOOTP reply at boot time. The
analyzer will retransmit the BOOTP request during this period if it
gets no reply. The retransmission time increases exponentially but is
bounded.
See The LAN Interface User’s Guide Supplement for more information.
Access Keys:
Softkey in the modify kit menu. Allows you to modify the following
characteristics of the thru calibration standard in your calibration kit:
delay, loss, and Z
0
.
See “Calibration Kits” on page 6-23 for more information.
Access Keys:
Softkey in the title and clock menu. Used to show the title (if any) and
date/time on the display and/or on a hardcopy output.
Access Keys: or
Softkey in the more display menu. Displays the menu to display and
edit the screen title and display clock.
Access Keys:
Softkey in the more printer menu. Sets the top margin of the printout
(non-printing space) in mm. Minimum setting is 0.00 mm (default);
maximum setting is 200.00 mm.
Access Keys:
Softkey in the save ASCII menu. Also known as S2P data format.
Saves measurement data in a format compatible with CAE programs.
See “Saving Instrument Data” on page 4-57 for more information.
Access Keys:
SYSTEM OPTIONS
CAL
DISPLAY
HARDCOPY
DISPLAY
HARDCOPY
SAVE RECALL
To Next Page
Loading...
