HP 8712ES - Page 398

8-92 ES User’s Guide
Hardkey/Softkey Reference
T
Softkey in the marker search menu. Toggle to ON if you want the
marker search functions to be updated with each sweep. When toggled
OFF (default setting), the functions are performed only once, when
selected.
See “Using Markers” on page 4-3 for more information.
Access Keys:
Softkey in the port extensions menu. Allows compensation for phase
shift due to an extended measurement reference plane on port 1.
See “Port Extensions” on page 5-18 for more information.
Access Keys:
Softkey in the port extensions menu. Allows compensation for phase
shift due to an extended measurement reference plane on port 2.
See “Port Extensions” on page 5-18 for more information.
Access Keys:
(Option 100 only) Softkey in the cable menu. Selects the S
21
(forward
transmission) type of measurement.
See “Using the BEGIN Key to Configure Measurements” on page 3-16
for more information.
Access Keys:
Softkey in the source . Displays the menu with choices for
triggering the analyzer. The analyzer can be triggered continuously
(default setting) or once. It can be triggered internally (default setting),
externally, or externally one frequency point at a time.
Softkey in the trigger menu. Displays the menu for the choice of
internal or external triggering.
Access Keys:
Tracking
on OFF
MARKER
Marker Search
Port 1
Extension
CAL
More Cal
Port Extensions
Port Ext’s on OFF
Port 2
Extension
CAL
More Cal
Port Extensions
Port Ext’s on OFF
Transmissn
BEGIN
Cable
Trigger
MENU
Trigger Source
MENU
Trigger