8-98 ES User’s Guide
Hardkey/Softkey Reference
V
Softkey in the CRT adjust menu. Changes the vertical positioning of
the display on both the internal CRT and an external monitor. Accepts
whole number values from 1 to 100, with 1 representing as far up as
possible and with 100 representing as far down as possible. The default
value set at the factory (and obtained by pressing
) is 74. This setting is not affected by an
instrument preset.
See “Using an External VGA Monitor” on page 4-87 for more
information on using an external display.
Access Keys:
Softkey in the select disk menu. Selects the analyzer's internal volatile
RAM as the place where information will be saved to or recalled from.
CAUTION Any information stored on the volatile RAM disk
will be lost if the analyzer's power is turned off.
See “Saving and Recalling Measurement Results” on page 4-55 for
more information.
Access Keys:
SYSTEM OPTIONS
SAVE RECALL
To Next Page
Loading...
