9-34 ES User’s Guide
Specifications
Table 9-8 Test Port Input (continued)
a. The Receiver Dynamic Range is calculated as the difference between the
receiver noise floor and the receiver maximum input. Receiver Dynamic
Range applies to transmission measurements only, since reflection measure-
ments are limited by directivity. The Receiver Dynamic Range for
HP 8714ET/ES 75 Ω analyzers is not a specification for frequencies >2 GHz; it
is a characteristic. For the HP 8712ES/8714ES, external broadband detectors
will provide more dynamic range than the internal broadband detectors.
HP 8712ET/ES and HP 8714ET/ES Test Port Input
Description
Spec.
(in dB)
Typical
(in dB)
System Bandwidths:
Fine
(15 Hz)
Fine
(15 Hz)
Med Wide
(4000 Hz)
Wide
(6500 Hz)
Receiver Dynamic Range
a
HP 8712ET/8714ET:
50 Ω:
Narrowband 115 121 96 58
Broadband (Internal) 66 71 64 48
75 Ω:
Narrowband 114 119 94 56
Broadband (Internal) 63 68 61 46
HP 8712ES/8714ES:
50 Ω:
Narrowband 106 115 90 57
Broadband (Internal) 54 59 52 39
75 Ω:
Narrowband 105 114 90 57
Broadband (Internal) 51 56 49 36
To Next Page
Loading...
