HP 9000 rp4440 - Management Processor Commands

Chapter 2
Configuring the Server
Management Processor (MP)
16
The LC Command Screen
LC commands:
MP:CM> lc -ip 127.0.0.1 -host uninitialized -mask 255.255.255.0 -gate 127.0.0.1 -web 2003
New LAN Configuration (* modified value):
* IP Address: 127.0.0.1
* MP Host Name: uninitialized
* Subnet Mask: 255.255.255.0
* Gateway Address: 127.0.0.1
Link State: Auto Negotiate
* Web Console Port Number: 2023
Confirm? (Y/ {N}) : y
-> LAN configuration has been updated
-> Reset the MP (XD command option ‘R’ ) for confirmation to take effect.
MP Host Name : uninitialized
MP:CM> xd -reset
Management Processor Commands
Table 2-1 Management Processor Commands and Descriptions
Command Description
BP Reset BMC passwords
CA Configure serial port parameters
CE Log a repair in the history buffer
CL Display console history
CG Certificate generator
CO Return to redirected console mode
CSP Connect to another service processor
CT Configure trace
DATE Display date
DC Default configuration
DF Display FRUID
DI Disconnect remote or LAN console