Chapter 3
Troubleshooting
Troubleshooting Using Online Support Tools
23
Step 5. For a complete explanation of the management processor and all commands, refer to the Utilities
chapter of the hp9000 rp4440 Server Operations Guide.
System Event Logs (SEL)
To access the system event logs perform the following steps:
Step 1. Access the optional management processor command prompt.
Step 2. Run the sl command. The Event Log Viewer menu will display:
SL
Event Log Viewer:
Log Name Entries % Full Latest Entry
-------------------------------------------------------------------
E - System Event 9 1 % 29 Oct 2002 19:15:05
F - Forward Progress 129 3 %
B - Current Boot 82
P - Previous Boot 0
L - Live Events
C - Clear All Logs
Enter your choice or [Q] to Quit:
Step 3. Select e to review the events. The Event Log Navigation menu will display:
Set up alert filter options on this buffer? (Y/[N])
(N)
Log Name Entries % Full Latest Entry
-------------------------------------------------------------------
E - System Event 410 47 % 18 Feb 2003 09:38:10
Event Log Navigation Help:
+ View next block (forward in time, e.g. from 3 to 4)
- View previous block (backward in time, e.g. from 3 to 2)
<CR> Continue to the next or previous block
D Dump the entire log for capture and analysis
To Next Page
Loading...
