bridge-template interface
6. WCDMA 3G Modem
7. CDMA2000 3G Modem
8. TD-SCDMA 3G Modem
9. SIP TRUNKING
10. SRTP
11. L2VPN connected to L3VPN
12. NAT DMZ host and related
features
13. SIP support for non early media
negotiation
14. IPsec RRI
15. Allows you to configure NAT
address groups, NAT server, and
attack protection through TR069.
16. Support of routing protocols for
6VPE
17. BIDIR-PIM
18. OSPFv3 support for MCE
19. Voice support for TR104
20. BGP, OSPFv3 and ISISv6 support
for IPv6 VPN BFD
21. Allows you to set a BGP update
interval of 0.
22. Allows you to use domain
names
to specify SNMP trap and log hosts.
23. TR069 supports the following
memory and CPU utilization nodes:
24. ACL configuration information
display filtering
25. A routing policy name can
contain up to 64 characters.
26. Allows you to use names as
BGP
community attributes
27. Permanent attribute for static
routes
28. Continue feature for routing
policy
29. E1POS and AM ports can send
calling numbers.
30. POS terminal access can use
the source address in the TPDU
header to map POS packets to
To Next Page
Loading...
Need help?
General
