<5> Modify Ethernet Parameter
Return to the BootWare menu.
2. Enter 5 to configure the network settings.
=========================<ETHERNET PARAMETER SET>=========================
|Note: '.' = Clear field. |
| '-' = Go to previous field. |
| Ctrl+D = Quit. |
==========================================================================
Protocol (FTP or TFTP) :tftp
Load File Name :main.bin
:
Target File Name :main.bin
:
Server IP Address :192.168.1.1
Local IP Address :192.168.1.253
Gateway IP Address :0.0.0.0
FTP User Name :user
FTP User Password :password
Table 17 Network parameter fields and shortcut keys
Press a dot (.) and then Enter to clear the setting for a field.
'-' = Go to previous field
Press a hyphen (-) and then Enter to return to the previous
field.
Press Ctrl + D to exit the Ethernet Parameter Set menu.
Set the file transfer protocol to FTP or TFTP.
Set the name of the file to be downloaded.
Set a file name for saving the file on the router. By default, the
target file name is the same as the source file name.
Set the IP address of the FTP or TFTP server. If a mask must be
set, use a colon (:) to separate the mask length from the IP
address. For example, 192.168.80.10:24.
Set the IP address of the router.
Set a gateway IP address if the router is on a different network
than the server.
Set the username for accessing the FTP server. This username
must be the same as configured on the FTP server. This field is
not available for TFTP.
Set the password for accessing the FTP server. This password
must be the same as configured on the FTP server. This field is
not available for TFTP.
3. Select an option in the Ethernet submenu to upgrade a system software image. For example,
enter 2 to upgrade the main system software image.
Loading.....................................................................