HP A-MSR20 - Preparing for the Upgrade; Table 14 Storage Media

16
Upgrade method
Remarks
Upgrading from the BootWare menu
Use this method when the router cannot correctly
start up.
Software Upgrading Through Web
Provides a quick software upgrade method through
Web.
Preparing for the upgrade
Before you upgrade system software, complete the following tasks:
 Set up the upgrade environment as shown in Table 15 5.
 Configure routes to make sure that the router and the file server can reach each other.
 Run a TFTP or FTP server on the file server.
 Log in to the CLI of the router through the console port.
 Copy the upgrade file to the file server and correctly set the working directory on the TFTP or
FTP server.
 Make sure the upgrade has minimal impact on the network services. During the upgrade, the
router cannot provide any services.
IMPORTANT:
In the BootWare menu, if you choose to download files over Ethernet, the Ethernet port must be
ETH0 on an MSR900, MSR920, MSR20-1X, MSR20-20, MSR20-21, MSR20-24, MSR30-10,
MSR30-11E, MSR30-11F, and MSR30-16 router, and must be GE0 on an MSR93X, MSR30-20,
MSR30-40, MSR30-60, MSR50-40, and MSR50-60 router.
Table 14 Storage media
Model
Storage medium
Path
MSR900 / 920
Flash
flash:/
MSR93X
Flash
flash:/
MSR20-1X
Flash
flash:/
MSR20-20 / 20-21 / 20-40
CF card
cfa0:/
MSR30-10 / 30-11E / 30-11F
Flash
flash:/
MSR30-16 / 30-20 / 30-40 / 30-60
CF card
cfa0:/
MSR50-40 / 50-60
CF card
cfa0:/