EasyManuals Logo

HP A-MSR20 User Manual

HP A-MSR20
88 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #86 background imageLoading...
Page #86 background image
40
|<0> Reboot |
============================================================================
Ctrl+Z: Access EXTEND-ASSISTANT MENU
Ctrl+F: Format File System
Enter your choice(0-9): 6
After the configuration skipping flag is set successfully, the following message appears:
Flag Set Success.
5. When the EXTEND-BOOTWARE menu appears again, enter 0 to reboot the router.
The router starts up with empty configuration.
6. To use the configuration in the next-startup configuration file, load the file in system
view.
<HP> system-view
[HP] configuration replace file startup.cfg
Current configuration will be lost, save current configuration? [Y/N]:n
Info: Now replacing the current configuration. Please wait...
Info: Succeeded in replacing current configuration with the file startup.cfg.
7. Configure a new console login password.
In the following example, the console login authentication mode is password and the
authentication password is 123456. For security, the password is always saved in
ciphertext to the configuration file, regardless of whether you specify the simple
keyword or cipher keyword for the set authentication password command.
<HP> system-view
[HP] user-interface console 0
[HP-ui-console0] authentication-mode password
[HP-ui-console0] set authentication password cipher 123456
8. To make the settings take effect after a reboot, save the running configuration to the
next-startup configuration file.
[HP] save
Dealing with user privilege level password loss
when password recovery capability is
enabled
9. Reboot the router to access the EXTEND-BOOTWARE menu, and then enter 8.
The current mode is password recovery.
Note: The current operating device is cfa0
Enter < Storage Device Operation > to select device.
===========================<EXTEND-BOOTWARE MENU>===========================
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |

Table of Contents

Other manuals for HP A-MSR20

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP A-MSR20 and is the answer not in the manual?

HP A-MSR20 Specifications

General IconGeneral
BrandHP
ModelA-MSR20
CategoryNetwork Router
LanguageEnglish

Related product manuals