32
|<2> Set Application File type |
|<3> Set Configuration File type |
|<4> Delete File |
|<0> Exit To Main Menu |
==========================================================================
Enter your choice(0-4):
Table 19 File Control submenu options
Displaying all files
To display all files, enter 1 in the File Control submenu:
Display all file(s) in cfa0:
'M' = MAIN 'B' = BACKUP 'S' = SECURE 'N/A' = NOT ASSIGNED
==========================================================================
|NO. Size(B) Time Type Name |
|1 640199 May/20/2012 09:53:16 N/A cfa0:/logfile/logfile.log |
|2 22165484 May/20/2012 09:18:10 B+S cfa0:/update.bin |
|3 1181 May/20/2012 09:42:54 N/A cfa0:/startup.cfg |
|4 22165484 May/20/2012 09:42:28 M cfa0:/main.bin |
==========================================================================
Changing the type of a system software image
System software image file attributes include main (M), backup (B), and secure (S). You
can store only one main image, one backup image, and one secure image on the router.
A system software image can have any combination of the M, B, and S attributes. If the file
attribute you are assigning has been assigned to an image, the assignment removes the
attribute from that image. The image is marked as N/A if it has only that attribute.
For example, the file main.bin has the M attribute and the file update.bin has the S attribute.
After you assign the M attribute to update.bin, the type of update.bin changes to M+S and
the type of main.bin changes to N/A.
To change the type of a system software image:
1. Enter 2 in the File Control submenu.
'M' = MAIN 'B' = BACKUP 'S' = SECURE 'N/A' = NOT ASSIGNED
==========================================================================
|NO. Size(B) Time Type Name |