19
Failed to get the secure boot file used at the next reboot!
<HP>
4. Perform the reboot command in user view to reboot the router.
<HP> reboot
Start to check configuration with next startup configuration file, please wait.
........DONE!
This command will reboot the device. Continue? [Y/N]:y
#Jun 28 16:17:22:368 2012 HP DEVM/1/REBOOT:
Reboot device by command.
%Jun 28 16:17:22:368 2012 HP DEVM/5/SYSTEM_REBOOT: System is rebooting now.
Now rebooting, please wait...
<HP>
System is starting...
5. After the reboot is complete, perform the display version command to verify that the system
software image is correct.
<HP>display version
HP Comware Platform Software
Comware Software, Version 5.20, Release 2207, Standard
Copyright (c) 2010-2012 Hewlett-Packard Development Company, L.P.
HP MSR30-20 uptime is 0 week, 0 day, 0 hour, 3 minutes
Last reboot 2012/06/28 16:19:05
System returned to ROM By <Reboot> Command.
CPU type: FREESCALE MPC8349 533MHz
256M bytes DDR SDRAM Memory
4M bytes Flash Memory
Pcb Version: 3.0
Logic Version: 2.0
Basic BootROM Version: 3.12
Extended BootROM Version: 3.13
[SLOT 0]CON (Hardware)3.0 (Driver)1.0, (Cpld)2.0
[SLOT 0]AUX (Hardware)3.0 (Driver)1.0, (Cpld)2.0
[SLOT 0]GE0/0 (Hardware)3.0 (Driver)1.0, (Cpld)2.0
[SLOT 0]GE0/1 (Hardware)3.0 (Driver)1.0, (Cpld)2.0
[SLOT 0]CELLULAR0/0 (Hardware)3.0 (Driver)1.0, (Cpld)2.0
<HP>
Using FTP to upgrade software
This section describes how to upgrade system software by using FTP.
Backing up the running system software image and configuration file
1. Perform the save command in any view to save the current configuration.
<HP> save
The current configuration will be written to the device. Are you sure? [Y/N]:y
Please input the file name(*.cfg)[cfa0:/startup.cfg]
(To leave the existing filename unchanged, press the enter key):
To Next Page
Loading...
Need help?
General
