HP A-MSR20 User Manual

40
Resolved Problems in CMW520-R2105P06
RTD51595
 Symptom: The packets can’t be forwarded m.
 Condition: When configuration the interface of virtual-template as the
output-interface of static route.
RTD52249
 Symptom: The key of HWTACACS can’t more than 96 characters.
 Condition: None
RTD52822
 Symptom: The packets matched up the static route can’t be transmitted by the
Virtual-template interface, and the static route to Virtual-template was invalid.
 Condition: The Virtual-template interface of the router connected a point-to-point
network, and the Virtual-template interface was an output interface of a static route.
RTD52279
 Symptom: The POS connections to the AUX interface failed.
 Condition: Run the POS APP function at the AUX interface of the router.
RTD52833
 Symptom: The caller name couldn’t be displayed at the called.
 Condition: The VOIP function was enabled at the router, and the ISDN SETUP message
from the PBX didn’t contain the caller name, instead the caller name was included at
the following Facility message.
Resolved Problems in CMW520-R2105P02
RTD51702
 Symptom: Then the router can’t recognize the USB 3G Modem.
 Condition: Plug the USB 3G Modem in and reboot the router with empty configuration.
RTD51603
 Symptom: The router will be crash when send packets of ICMP unreachable.
 Condition: When configuration the command of “nat outbound” on the interface.
RTD51986
 Symptom: The A-MSR 30-16 didn’t support the DMC function, and there is any
command of DMC at the A-MSR 30-16.
 Condition: None

HP A-MSR20 Specifications

General

Brand	HP
Model	A-MSR20
Category	Network Router
Language	English