HP A-MSR20 - Deleting Files; Handling Software Upgrade Failures

33
|1 22165484 May/20/2012 09:18:10 B+S cfa0:/update.bin |
|2 22165484 May/20/2012 09:42:28 M cfa0:/main.bin |
|0 Exit |
========================================================================
Enter file No:
2. Enter the number of the file you are working with, and press Enter.
Modify the file attribute:
==========================================================================
|<1> +Main |
|<2> -Main |
|<3> +Backup |
|<4> -Backup |
|<0> Exit |
==========================================================================
Enter your choice(0-4):
3. Enter a number in the range of 1 to 4 to add or delete a file attribute for the file.
Set the file attribute success!
Deleting files
When storage space is insufficient, you can delete obsolete files to free up storage space.
To delete files:
1. Enter 4 in the File Control submenu.
Deleting the file in cfa0:
'M' = MAIN 'B' = BACKUP 'S' = SECURE 'N/A' = NOT ASSIGNED
==========================================================================
|NO. Size(B) Time Type Name |
|1 640199 May/20/2012 09:53:16 N/A cfa0:/logfile/logfile.log |
|2 22165484 May/20/2012 09:18:10 B+S cfa0:/update.bin |
|3 1181 May/20/2012 09:42:54 N/A cfa0:/startup.cfg |
|4 22165484 May/20/2012 09:42:28 M cfa0:/main.bin |
|0 Exit |
==========================================================================
Enter file No:
2. Enter the number of the file to delete.
3. When the following prompt appears, enter Y.
The file you selected is cfa0:/backup.bak,Delete it? [Y/N]Y
Deleting........Done!
Handling software upgrade failures
If a software upgrade fails, the system runs the old software version. To handle a software
failure:
1. Check the physical ports for a loose or incorrect connection.