EasyManua.ls Logo

HP A-MSR20 - Resolved Problems in CMW520-R2207 P38

HP A-MSR20
88 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
33
RTD57556
Symptom: Because the BGP timer of the router was inaccurate, the BGP neighbors
were UP and DOWN again and again.
Condition: The CPU usage of the router was high.
Resolved problems in CMW520-R2207P38
RTD58234
Symptom: The port will be shut down.
Condition: Insert a pseudo fiber module to a port of an HP A-MSR router.
RTD57850
Symptom: There wasnt the command to adjust the cable attenuation parameters at
the IMA-T1 interface of the router.
Condition: None.
RTD57858
Symptom: The pulse shape of IMA-T1 interface was too low.
Condition: None.
RTD58297
Symptom: The pulse shape of SIC-EPRI interface has overshot /undershot.
Condition: None.
RTD58164
Symptom: The pulse shape of IMA-E1 interface was too low.
Condition: None.
RTD57892
Symptom: When the router received the SIP packets whichs record-route and
contact head field the Transfer Protocol were inconsistent, because the router
selected the error Transfer Protocol the voice call failed
Condition: The router as VOICE gateway connected with AYAYA .
RTD57811
Symptom: The dialer connection cant establish.
Condition: The Dialer interface of the router set chap authentication for call-in
connection.
RTD58221
Symptom: The router rebooted abnormally.

Table of Contents

Other manuals for HP A-MSR20

Related product manuals