HP A-MSR20 - Table 15 Bootware Menu Options

23
CPU Type : MPC8349E
CPU L1 Cache : 32KB
CPU Clock Speed : 533MHz
Memory Type : DDR SDRAM
Memory Size : 256MB
Memory Speed : 264MHz
BootWare Size : 4096KB
Flash Size : 4MB
cfa0 Size : 256MB
CPLD Version : 2.0
PCB Version : 3.0
BootWare Validating...
Press Ctrl+B to enter extended boot menu...
2. Press Ctrl + B at the prompt.
BootWare password: Not required. Please press Enter to continue.
3. Press Enter the BootWare password at the prompt to access the BootWare menu.
The current mode is password recovery.
Note: The current operating device is cfa0
Enter < Storage Device Operation > to select device.
===========================<EXTEND-BOOTWARE MENU>===========================
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Clear Super Password |
|<9> Storage Device Operation |
|<0> Reboot |
============================================================================
Ctrl+Z: Access EXTEND-ASSISTANT MENU
Ctrl+F: Format File System
Enter your choice(0-9):
Table 15 BootWare menu options
Item
Description
<1> Boot System
Boot the system software image.
<2> Enter Serial SubMenu
Access the Serial submenu (see Table 18 ) for upgrading
system software through the console port or changing
the serial port settings.
<3> Enter Ethernet SubMenu
Access the Ethernet submenu (see Table 16 ) for
upgrading system software through an Ethernet port or
changing Ethernet settings.