HP A-MSR20 - Page 67

21
[ftp]
Upgrading the system software
1. Perform the get command in FTP client view to download the system software image file
MSR30-CMW520-R2207-SI.BIN to the CF card on the router.
[ftp] get msr20-cmw520-r2207-si.bin
227 Entering passive mode (192,168,1,1,7,225)
125 Using existing data connection
226 Closing data connection; File transfer successful.
FTP: 23861744 byte(s) received in 30.907 second(s), 772.00K byte(s)/sec.
[ftp]
2. Perform the quit command in FTP client view to return to user view.
[ftp]quit
221 Service closing control connection
<HP>
3. Perform the boot-loader command in user view to load the file
MSR30-CMW520-R2207-SI.BIN and specify the file as the main image file at the next
reboot.
<HP> boot-loader file msr30-cmw520-r2207-si.bin main
This command will set the boot file. Continue? [Y/N]:y
The specified file will be used as the main boot file at the next reboot on slot
0!
<HP>
4. Perform the display boot-loader command in user view to verify that the file has been loaded.
<HP> display boot-loader
The boot file used at this reboot:cfa0:/main.bin attribute: main
The boot file used at the next reboot:cfa0:/ msr30-cmw520-r2207-si.bin attribute:
main
Failed to get the backup boot file used at the next reboot!
Failed to get the secure boot file used at the next reboot!
<HP>
5. Perform the reboot command in user view to reboot the router.
<HP> reboot
Start to check configuration with next startup configuration file, please wait.
........DONE!
This command will reboot the device. Continue? [Y/N]:y
#Jun 28 16:17:22:368 2012 HP DEVM/1/REBOOT:
Reboot device by command.
%Jun 28 16:17:22:368 2012 HP DEVM/5/SYSTEM_REBOOT: System is rebooting now.
Now rebooting, please wait...
<HP>
System is starting...
6. After the reboot is complete, perform the display version command to verify that the system
software image is correct.
<HP>display version