Troubleshooting Guide www.hp.com 2–23
Troubleshooting Without Diagnostics
✎
If you set digital as the Output Mode, the internal speaker and external analog
speakers will no longer output audio until you switch back to an auto-sense or
analog mode.
If you set analog as the Output Mode, external digital speakers will not function
until you change the output mode back to an auto-sense or digital mode.
See Appendix D, “Setting up Analog/Digital Audio Output” for additional
information.
Sound cuts in and out. Processor resources are
being used by other
open applications.
Shut down all open
processor-intensive applications.
Computer appears to be
locked up while recording
audio.
The hard disk may be
full.
Before recording, make sure there is
enough free space on the hard disk.
You can also try recording the audio
file in a compressed format.
Solving Audio Problems (Continued)
Problem Cause Solution
To Next Page
Loading...
