Installing Hardware Options
4. Attach any cabling required for operating the expansion board.
a. To cable the Remote Insight Lights-Out Edition II expansion card, connect
the adapter cable included with the option kit to the expansion card and to the
connector on the system board. To complete external cabling and setup, refer
to the “Cabling the Remote Insight Lights-Out Edition II (Optional)” section
in Chapter 4, “Server Installation.”
Figure 3-10: Cabling the Remote Insight Lights-Out
Edition II to the system board
3-14 HP ProLiant DL320 Generation 2 Server Setup and Installation Guide
HP CONFIDENTIAL
Writer: Anna Roberts File Name: d-ch3 Installing Hardware Options.doc
Codename: MoonStar Part Number: 293166-002 Last Saved On: 1/31/03 11:16 AM
To Next Page
Loading...
