Installing Hardware Options
8. Install the hard drive tray into the chassis (1), and secure it by tightening the hard
drive tray thumbscrew (2).
Figure 3-20: Installing a hard drive tray into the chassis
9. Repeat steps 6 through 8 to install a second ATA hard drive.
10. Connect the ATA cables as shown below.
Figure 3-21: Cabling the ATA hard drives
11. Connect the hard drive power cable to the ATA hard drives.
HP ProLiant DL320 Generation 2 Server Setup and Installation Guide 3-25
HP CONFIDENTIAL
Writer: Anna Roberts File Name: d-ch3 Installing Hardware Options.doc
Codename: MoonStar Part Number: 293166-002 Last Saved On: 1/31/03 11:16 AM
To Next Page
Loading...
