Installing Hardware Options
7. Align the new hard drive in the tray (1), and secure it with four 6-32
Phillips-head screws (2).
Figure 3-19: Securing a hard drive into a hard drive tray
IMPORTANT: Be sure that the hard drives are installed with the data and power connectors
along the bottom of the tray and facing away from the front grill.
NOTE: The Phillips screws for this operation are shipped along the top edge of the PCI riser
board assembly.
3-24 HP ProLiant DL320 Generation 2 Server Setup and Installation Guide
HP CONFIDENTIAL
Writer: Anna Roberts File Name: d-ch3 Installing Hardware Options.doc
Codename: MoonStar Part Number: 293166-002 Last Saved On: 1/31/03 11:16 AM
To Next Page
Loading...
