To Next Page

To Previous Page

4-23

Web and MAC Authentication

Configuring Web Authentication

Figure 4-6. Adding Web Servers with the aaa port-access web-based ews-server Command

Syntax: aaa port-access web-based [dhcp-addr <ip-address/mask>]

Specifies the base address/mask for the temporary IP

pool used by DHCP. The base address can be any valid

ip address (not a multicast address). Valid mask range

value is <255.255.240.0 - 255.255.255.0>.

(Default: 192.168.0.0/255.255.255.0)

Syntax: aaa port-access web-based [dhcp-lease <5 - 25>]

Specifies the lease length, in seconds, of the temporary

IP address issued for Web Auth login purposes.

(Default: 10 seconds)

Syntax: aaa port-access web-based [ewa-server <ipv4-addr | hostname>

[<page-path>]]

Configures a connection with the web server at the

specified IPv4 address (ipv4-addr) or host name (ipv4-

addr) on which customized login web pages used for

Web Authentication are stored. A maximum of 3 web

servers may be configured on the switch.

The optional <page-path> parameter defines the direc-

tory path on the server where all customized login web

pages (graphics, HTML frames, and HTML files) are

stored. (Default: The default <page-path> value is “/” for

root directory. If the web server is also used for other

purposes, you may wish to group the HTML files in

their own directory, for example in “/EWA/”)

HP Switch (config)# aaa port-access web-based 47 ewa-server 10.0.12.179

/EWA

HP Switch (config)# aaa port-access web-based 47 ewa-server 10.0.12.180

/EWA

HP Switch (config)#

Questions and Answers:

Need help?

Do you have a question about the HP E3800 Series and is the answer not in the manual?

HP E3800 Series Specifications

General