To Next Page

To Previous Page

13-34

Configuring Port-Based and User-Based Access Control (802.1X)

802.1X Open VLAN Mode

■ Unauthorized-Client VLAN: Configure this VLAN when unauthenti-

cated, friendly clients will need access to some services before being

authenticated or instead of being authenticated.

■ Authorized-Client VLAN: Configure this VLAN for authenticated clients

when the port is not statically configured as an untagged member of a

VLAN you want clients to use, or when the port is statically configured as

an untagged member of a VLAN you do not want clients to use. (A port

can be configured as untagged on only one port-based VLAN. When an

Authorized-Client VLAN is configured, it will always be untagged and will

block the port from using a statically configured, untagged membership

in another VLAN.) Note that after client authentication, the port returns

to membership in any tagged VLANs for which it is configured. See the

"Note", above.

Questions and Answers:

Need help?

Do you have a question about the HP E3800 Series and is the answer not in the manual?

HP E3800 Series Specifications

General