HP EliteDesk 705 G1 Microtower User Manual

6. Remove the cables from the three clips built into the basepan.
7. Remove the Torx T15 screw (1) that secures the assembly to the front of the chassis.
8. Press the tab on the right side of the assembly (2), and then push the assembly into the
computer.
96 Chapter 6 Removal and replacement procedures – small form factor (SFF) chassis

HP EliteDesk 705 G1 Microtower Specifications

General

Brand	HP
Model	EliteDesk 705 G1 Microtower
Category	Desktop
Language	English