Processor
Description
AMD A10-7850B processor, 3.7 GHz
AMD A10-7800B processor, 3.57 GHz
AMD A10-6800B processor, 4.1 GHz
AMD A8-7600B processor, 3.1 GHz
AMD A8-6500B processor, 3.5 GHz
AMD A6-7400B processor, 3.5 GHz
AMD A6-6400B processor, 3.9 GHz
AMD A4-7300B processor, 3.9 GHz
AMD A4-6300B processor, 3.7 GHz
1. Prepare the computer for disassembly (Preparation for disassembly on page 32).
2. Remove the access panel (
Access panel on page 33).
3. Remove the heat sink (
Heat sink on page 55).
4. Rotate the locking lever to its full open position (1).
5. Carefully lift the processor from the socket (2).
CAUTION: Do NOT handle the pins in the processor socket. These pins are very fragile and
handling them could cause irreparable damage. Once pins are damaged it may be necessary to
replace the system board.
The heat sink must be installed within 24 hours of installing the processor to prevent damage to
the processor’s solder connections.
Reverse the removal procedure to install a new processor.
56 Chapter 5 Removal and replacement procedures – Microtower (MT) chassis
To Next Page
Loading...
Need help?
General