HP EliteDesk 705 G1 Microtower User Manual

Optical drive bezel blank
On some models, there is a bezel blank covering the slim optical drive bay. Remove the bezel blank
before installing an optical drive. To remove the bezel blank:
1. Remove the access panel (
Access panel on page 33)
2. Remove the front bezel (
Front bezel on page 34)
3. To remove the bezel blank, press upward on the bottom tab and press downward on the top tab
on the right side of the blank (1), and then rotate the blank off the front of the bezel (2).
Optical drive bezel blank 35

HP EliteDesk 705 G1 Microtower Specifications

General

Brand	HP
Model	EliteDesk 705 G1 Microtower
Category	Desktop
Language	English