HP EliteDesk 705 G1 Microtower User Manual

5. To install a 3.5-inch hard drive, you must transfer the silver and blue isolation mounting guide
screws from the old hard drive to the new hard drive.
6. Align the guide screws with the slots on the chassis drive cage, press the hard drive down into
the bay, then slide it forward until it stops and locks in place.
88 Chapter 6 Removal and replacement procedures – small form factor (SFF) chassis

HP EliteDesk 705 G1 Microtower Specifications

General

Brand	HP
Model	EliteDesk 705 G1 Microtower
Category	Desktop
Language	English