HP Engage Go Mobile System Service Manual

To install the WWAN module, reverse the removal procedures.
When connecting the antennas cables, connect the cable labeled “1” (black sticker) to the AUX “1” connector
on the module and the cable labeled “2” (white sticker) to the MAIN “2” connector on the module.
NOTE: WWAN modules are designed with a notch to prevent incorrect insertion.
Be sure to re-adhere the tape to across the antenna connectors when replacing the WWAN module.
50 Chapter 6 Removal and replacement procedures for the mobility head unit

HP Engage Go Mobile System Specifications

General

Display	1920 x 1280
Memory	8 GB
Storage	128 GB
Operating System	Windows 10 IoT Enterprise
Connectivity	Wi-Fi, Bluetooth
Ports	headphone/microphone combo
Security	fingerprint reader