HP ESA-E Series - Functional Index to SCPI Subsection

4-2 Chapter4
Programming Command Cross References
Functional Index to SCPI Subsection
Functional Index to SCPI Subsection
The following table lists the SCPI subsections or subsystems associated
with the instrument function category you wish to perform. The
commands listed that begin with an asterisk (*) are IEEE common
commands. These commands, and the SCPI commands in the
subsection or subsystem, are documented in Chapter 5, “Language
Reference,” in this guide.
Function Category SCPI Subsection or Subsystem
ALIGNMENT
*CAL?
*TST?
:CALibration
:STATus:QUEStionable
ATTENUATOR
see function category: Internal
Attenuation and Source
BANDWIDTH
:CALCulate
:FETCh
:INITiate
:MEASure
:READ
[:SENSe]:BANDwidth
[:SENSe]:EBWidth
[:SENSe]:OBWidth
CONFIGURATION and STATUS *RCL <register>
*SRE <integer>
*STB?
:SYSTem
CONTROL ABORt
CORRECTED MEASUREMENTS
[:SENSe]:CORRection
COUPLING
:COUPle
[:SENSe]:BANDwidth
DELETE, LOAD, OR SAVE
*SAV <register>
:MMEMory
DEMODULATION
[:SENSe]:DEMod
DISPLAY
:UNIT
FREQUENCY
[:SENSe]:FREQuency
:STATus:QUEStionable