5-126 Chapter5
Language Reference
TRACe Subsystem
is equivalent to : (trace 2 = trace 1 + trace 3)
Mean Trace Data
:TRACe:MATH:MEAN? <trace>
Returns the mean of the amplitudes of the trace amplitude elements in
measurement units.
Traces are: TRACE[1|2|3]
Query the Signal Peaks
:TRACe:MATH:PEAK[:DATA]?
Outputs the signal peaks by frequency or by amplitude. The sort mode
is determined by the command :TRACe:MATH:PEAK:SORT. The
commands :CALCulate:MARKer:PEAK:EXCursion and
:CALCulate:MARKer:PEAK:THReshold are used to determine what is
a signal peak. To get the number of signals found meeting the specified
limits, use the query :TRACe:MATH:PEAK:POINts?
To Next Page
Loading...
