HP ESA-E Series - Print a Hard Copy; Form Feed the Print Item; Page Orientation; Number of Items Printed on a Page

Chapter 5 5-51
Language Reference
HCOPy Subsystem
Front Panel
Access:
Print Setup, Color On Off
Print a Hard Copy
:HCOPy[:IMMediate]
The entire screen is output to the parallel port.
Front Panel
Access:
Print
Form Feed the Print Item
:HCOPy:ITEM:FFEed[:IMMediate]
Sends the printer a command to form feed.
Front Panel
Access:
Print Setup, Eject Page
Page Orientation
:HCOPy:PAGE:ORIentation LANDscape|PORTrait
:HCOPy:PAGE:ORIentation?
Specifies the orientation of the print.
NOTE Landscape mode is not presently supported for PCL-3 printers.
Factory Preset
and *RST: The factory default is Landscape. This parameter is
persistent, which means that it retains the setting
previously selected, even through a power cycle.
Front Panel
Access:
Print Setup, Orientation, Landscape
Print Setup, Orientation, Portrait
Number of Items Printed on a Page
:HCOPy:PAGE:PRINts <integer>
:HCOPy:PAGE:PRINts?
Sets the number of display print outputs sent to print on one piece of
paper, before a form feed is sent.