HP ESA-E Series - Measure Upper Channel Power; Measure Channel Power and Density; Measure Channel Power; Measure Channel Power Density

Chapter 5 5-57
Language Reference
MEASurement Subsystem
Measure Upper Channel Power
:MEASure:ACPower:UPPer?
This command returns the value of the upper channel power relative to
the main channel power, in dB.
Measure Channel Power and Density
:MEASure:CHPower?
This command returns scalar results of main channel power, and power
density.
Remarks: The main channel power is returned in the current
amplitude units, and the density value is returned in
current amplitude units/Hz. The results are returned
in a comma-separated list.
Measure Channel Power
:MEASure:CHPower:CHPower?
This command returns the value of the channel power in amplitude
units.
Front Panel
Access: MEASURE, Channel Power
Measure Channel Power Density
:MEASure:CHPower:DENSity?
This command returns the value of the channel power density in
amplitude units/Hz.
Measure Emission Bandwidth
:MEASure:EBWidth?
This command returns the value of emission bandwidth in Hz.
Front Panel
Access:
MEASURE, Emission BW
Return % Total Harmonic Distortion
:MEASure:HARMonics[:DISTortion]?[<number>]
Returns the computed total harmonic distortion as a percentage.
Range: 0 to float64