HP ESA-E Series - Page 241

Chapter 5 5-87
Language Reference
SENSe Subsystem
Range: Maximum negative frequency to the maximum positive
frequency. The maximum positive frequencies are:
HP ESA E4401B, E4411B: 1.58 GHz
HP ESA E4402B, E4403B: 3.10 GHz
HP ESA E4404B: 6.78 GHz
HP ESA E4405B: 13.3 GHz
HP ESA E4407B, E4408B: 27.0 GHz
Default Unit: Hz
Front Panel
Access:
FREQUENCY/Channel, CF Step Man
Set the Channel Frequency
[:SENSe]:FREQuency:CHANnel <freq>
Set the channel frequency.
Remarks: This command is used for measurements in the
MEASURE menu.
Frequency Span
[:SENSe]:FREQuency:SPAN <freq>
[:SENSe]:FREQuency:SPAN?
Set the frequency span. Setting the span to 0 Hz puts the analyzer into
zero span.
Factory Preset
and *RST: HP ESA E4401B, E4411B: 1.5 GHz
HP ESA E4402B, E4403B: 3.0 GHz
HP ESA E4404B: 6.7 GHz
HP ESA E4405B: 13.2 GHz
HP ESA E4407B, E4408B: 26.5 GHz
Range: HP ESA E4401B, E4411B: 0 Hz to 1.58 GHz
HP ESA E4402B, E4403B: 0 Hz to 3.10 GHz
HP ESA E4404B: 0 Hz to 6.78 GHz
HP ESA E4405B: 0 Hz to 13.3 GHz
HP ESA E4407B, E4408B: 0 Hz to 27.0 GHz
Default Unit: Hz
Front Panel
Access:
SPAN/X Scale, Span