What’s New in This Guide
Guardian User’s Guide—425266-001
xviii
New and Changed Information
The G06.05 edition of this guide (previously known as the Guardian 90 Operating
System User’s Guide) contained these changes:
•
Information was added from the former Guardian System Operations Guide, adding
several new sections to this guide and expanding on existing sections.
•
Updated display information was added for the Getting File Information (FILEINFO
Command) on page 3-6.
•
New parameters for the FUP SET command were added to Table 8-1, Parameters of
the FUP SET Command, on page 8-3.
•
Y2K-compliant examples were added and information field descriptions were
updated for VPROC to Section 18, Displaying Version and System Information
.
•
A description of using SYSINFO for displaying basic information about local and
remote systems was added to Section 18, Displaying Version and System
Information.
•
The section about the Disk Space Analysis Program (DSAP) was incorporated into
Section 9, Performing Routine Disk Operations.
•
Updated the Subsystem Control Facility (SCF) commands and descriptions in
Table 9-1, SCF Command Summary, on page 9-1.
•
C-series references were removed where appropriate.
To Next Page
Loading...
Need help?
General