Using Labeled Tapes
Guardian User’s Guide—425266-001
10-32
Solving Common Tape Subsystem Problems
Tape label:
An unexpired labeled tape is
being used, resulting in error 49.
An unexpired labeled tape
was used.
Scratch the tape or use a
different tape.
A tape label record is missing or
incorrect.
An attempt was made to
access a tape with an
incorrect or missing label.
Use the MEDIACOM
INFO TAPELABEL
command, correct the label,
or use a different tape.
A tape fails to respond to a
BACKUP command.
A tape with an
inappropriate label type
was mounted in error.
Use a different tape.
Table 10-3. Common Tape Subsystem Problems (page 2 of 2)
Problem Possible Causes Solution
To Next Page
Loading...
