HP Guardian - Page 396

Monitoring Hardware Components
Guardian User’s Guide—425266-001
19-18
Checking ServerNet LAN Subsystem Status
A listing similar to this is sent to your home terminal:
Examples
•
To obtain a listing of all SACs on $ZZLAN.E4SA1, enter:
> SCF STATUS SAC $ZZLAN.E4SA1*
•
To obtain a listing of all adapters on $ZZLAN, enter:
> SCF STATUS ADAPTER $ZZLAN.*
•
To obtain a detailed listing of the LIF on $ZZLAN.LAN0, enter:
> SCF STATUS LIF $ZZLAN.LAN0 , DETAIL
->STATUS PIF $ZZLAN.E4SA0.0
SLSA Status PIF
Name State
$ZZLAN.E4SA0.0.A STARTED
->STATUS SAC $ZZLAN.E4SA1*
SLSA Status SAC
Name Owner State
$ZZLAN.E4SA1.0 1 STARTED
$ZZLAN.E4SA1.1 0 STARTED
$ZZLAN.E4SA1.2 0 STARTED
$ZZLAN.E4SA1.3 1 STARTED
->STATUS ADAPTER $ZZLAN.*
SLSA Status ADAPTER
Name State
$ZZLAN.MIOE0 STARTED
$ZZLAN.E4SA0 STARTED
$ZZLAN.MIOE1 STOPPED
$ZZLAN.E4SA2 STARTED
->STATUS LIF $ZZLAN.LAN0 , DETAIL
SLSA Detailed Status LIF \SYS.$ZZLAN.LAN0
Access State............. UP
CPUs with Data Path...... ( 0 )
Potential Access CPUs.... ( 0, 1 )
State.................... STARTED
Trace Filename...........
Trace Status.............