HP HPE Apollo 2000 Gen10 Plus User Manual

10. Release the front I/O cable:
a.
Disconnect the front I/O cable from the fan board (callout 1).
b.
Release the front I/O cable from the triangular cable bracket (callout 2).
c.
Thread the front I/O cable out of the chassis (callout 3).
• Left front I/O cable
• Right front I/O cable
Removal and replacement procedures
49

HP HPE Apollo 2000 Gen10 Plus Specifications

General

Brand	HP
Model	HPE Apollo 2000 Gen10 Plus
Category	Measuring Instruments
Language	English