copy <startup-config|running-config|crash-log|event-log|crash-rec|Command>
tftp <ip-addr> <remote-file>
This command writes the switch's configuration file, crashrec, eventlog or the output
from a command specified by Command to the remote file on the remote host.
show startup-config
Displays the configuration stored in flash.
show running-config
Displays the configuration stored in flash.
show boot-history
Displays the switch shutdown history.
kill
This command kills all other active sessions.
show logging [-a] [<search-text>]
Displays the switch's event log. If -a is specified then entire internal switch log is
displayed. If search-text is specified then only events that contain that text are
displayed.
print <command>
Used to execute a command and captures its output using a terminal emulator. This
command will display “Press RETURN when ready…” to allow the terminal
emulator to be set up to for the capture and “Press RETURN when done…” once
the output is complete.
show history
Displays the current command history.
reload
Performs a warm reboot.
clear arp
To clear the arp cache of all non-permanent entries.
7
To Next Page
Loading...
