HP Procurve 2524 User Manual

--------------------- --------- ----------
3.2.1 System Information
HP ProCurve Switch xxxxx 01-Apr-2000
==========================- CONSOLE - MANAGER MODE -============================
Switch Configuration - System Information
System Name : DEFAULT_CONFIG
System Contact :
System Location :
Inactivity Timeout (min) [0] : 0
Inbound Telnet Enabled [Yes] : Yes
Time Zone [0] : 0
Daylight Time Rule [None] : None
Actions-> Cancel Edit Save
Address Age Interval (min) [5] : 5
Web Agent Enabled [Yes] : Yes
Help
Cancel changes and return to previous screen.
Use arrow keys to change action selection and <Enter> to execute action.
3.2.2 Port/Trunk Settings
HP ProCurve Switch xxxxx 01-Apr-2000
==========================- CONSOLE - MANAGER MODE -============================
Switch Configuration – Port/Trunk Settings
Port Type Enabled Mode Flow Ctrl Group Type
---- -------- + -------
A1 10/100TX | Yes
A2 10/100TX | Yes
A3 10/100TX | Yes
A4 10/100TX | Yes
A5 10/100TX | Yes
A6 10/100TX | Yes
A7 10/100TX | Yes
A8 10/100TX | Yes
A9 10/100TX | Yes
A10 10/100TX | Yes
A11 10/100TX | Yes
Auto Disable Dyn LACP
Auto Disable Dyn LACP
Auto Disable Trk1 Trunk
Auto Disable Trk1 Trunk
Auto Disable
Auto Disable Trk2 FEC
Auto Disable Trk2 FEC
Auto Disable Dyn LACP
Auto Disable Trk2 FEC
Auto Disable MESH
Auto Disable MESH
Actions-> Cancel Edit Save Help
Cancel changes and return to previous screen.
Use arrow keys to change action selection and <Enter> to execute action.
52

HP Procurve 2524 Specifications

General

Switching Capacity	8.8 Gbps
Layer	Layer 2
Rack Mounting	Yes
MAC Address Table Size	8000 entries
Jumbo Frame Support	No
Power Supply	Internal
Management	CLI, SNMP
Operating Temperature	0°C to 40°C
Operating Humidity	15% to 95% non-condensing
Ports	24 x 10/100 + 2 x 10/100/1000