----
3.3 Password Menu
HP ProCurve Switch xxxxx 01-Apr-2000
==========================- CONSOLE - MANAGER MODE -============================
Set Password Menu
1. Set Operator Password
2. Set Manager Password
3. Delete Password Protection
4. Return to Previous Menu...
0. Return to Main Menu...
Prompts you to enter an Operator-level password.
To select menu item, press item number, or highlight item and press <Enter>.
3.4 Event Log
HP ProCurve Switch xxxxx 01-Apr-2000
==========================- CONSOLE - MANAGER MODE -============================
M 01/01/90 00:00:07 sys: 'System reboot due to Power Failure'
I 01/01/90 00:00:07 system: --------------------------------------------------
I 01/01/90 00:00:07 system: System went down without saving crash information
I 01/01/90 00:00:29 timep: timep client enabled
I 01/01/90 00:00:29 garp: GARP Protocol enabled
I 01/01/90 00:00:31 tftp: Enable succeeded
I 01/01/90 00:00:31 system: System Booted.
I 01/01/90 00:00:37 ports: port 1 is now on-line
I 01/01/90 00:00:37 ip: network enabled on 10.0.8.105
I 01/01/90 00:39:55 mgr: SME CONSOLE Session - MANAGER Mode established
Log events stored in memory 1-13. Log events on screen 1-13.
Actions-> Back Next page Prev page End Help
Return to previous screen.
Use up/down arrow scroll log one line, left/right arrow keys to
change action selection, and <Enter> to execute action.
58
To Next Page
Loading...
Need help?
General