HP Procurve 2524 - Vlan Configuration; VLAN Commands - EXEC Level; VLAN Commands - Configuration Level

1
2
3
4
5
6
7
8
------------------------
------------ ------------
2.13 VLAN Configuration
2.13.1 VLAN commands - EXEC level
show vlans
Displays the current VLANs.
Output Format:
Switch Configuration - VLAN Information
VLAN Support [No] : Yes
Maximum VLANs to support [8] : 8
Primary VLAN: DEFAULT_VALN
802.1Q VLAN ID Name
--------------
1 DEFAULT_VLAN
show vlans <vlan-id>
Type Status
Static Up
Displays which ports are assigned to particular VLANs.
Output Format:
Switch Configuration - VLAN - VLAN Port Assignment
Port DEFAULT_VLAN vlan2 | Port DEFAULT_VLAN vlan2
---- + ------------ | ---- + ------------
| Untagged No | 9 | Untagged No
| Untagged No | 10 | Untagged No
| Untagged No | 11 | Untagged No
| Untagged No | 12 | Untagged No
| Untagged No | 13 | Untagged No
| Untagged No | 14 | Untagged No
| Untagged No | 15 | Untagged No
| Untagged No | 16 | Untagged No
2.13.2 VLAN commands – Configuration Level
max-vlans <1..256>
Sets the maximum number of VLANs on the system. The default value is 8.
36