HP Procurve 2524 - 2.3 Port and Network Management

2.8 Port Settings
2.8.1 Port commands - EXEC level
show interfaces config
Displays the basic configuration of the switch ports.
Output Format:
Switch Configuration - Port Settings
Port
----
1
2
3
4
5
6
7
8
9
10
11
show statistics
Type Enabled Mode Flow Ctrl Bcast Limit
-------- + ------- ------------ --------- -----------
10/100TX | Yes Auto Disable 0
10/100TX | Yes Auto Disable 0
10/100TX | Yes Auto Disable 0
10/100TX | Yes Auto Disable 0
10/100TX | Yes Auto Disable 0
10/100TX | Yes Auto Disable 0
10/100TX | Yes Auto Disable 0
10/100TX | Yes Auto Disable 0
10/100TX | Yes Auto Disable 0
10/100TX | Yes Auto Disable 0
10/100TX | Yes Auto Disable 0
Displays a summary of the network traffic handled by the switch.
Output Format:
Status and Counters - Port Counters
Port Total Bytes Total Frames Errors Rx Drops Tx
---- ------------- ------------- ------------- -------------
1 83,612,741 446,524 3 0
2 0 0 0 0
3 0 0 0 0
4 0 0 0 0
5 0 0 0 0
6 0 0 0 0
7 0 0 0 0
8 15,080 10 0 0
9 0 0 0 0
10 0 0 0 0
11 0 0 0 0
20