To Next Page

To Previous Page

[no] page

Toggles the paging mode for display commands so that the “—more –“ will appear

or not appear.

repeat

Repeatedly executes the previous command until a key is pressed.

vlan <vlan-name | vlan-id>

Enters the VLAN interface configuration context for the VLAN.

2.2 Diagnostic Commands

boot [system [flash <primary|secondary>]]

Performs cold reboot of switch.

write terminal

This command displays the running configuration.

write memory

This command saves the running configuration to Flash.

erase startup-config

Deletes the configuration stored in flash so that the switch will reverted to it’s

default configuration upon reboot.

erase flash <primary|secondary>

Deletes the configuration stored in flash so that the switch will reverted to it’s

default configuration upon reboot.

copy tftp <startup-config|flash> <ip-addr> <remote-file>

[primary|secondary]

Retrieves a configuration or OS file on the remote host, and overwrites the switch's

corresponding file with the remote file.

Questions and Answers:

Need help?

Do you have a question about the HP Procurve 2524 and is the answer not in the manual?

HP Procurve 2524 Specifications

General